Musical Surroundings Fosgate Signature Bedienungshandbuch PDF herunterladen (Seite 6)

Unpacking

Opening the cartons: Use caution when opening the cartons.

Using a sharp edged tool could cause damage to the contents.

Foam packing:

When you open the

inner carton, you will

see a layer of foam

covering the

headphone

amplifier. There are

cut outs in the foam

containing each

vacuum tube,

located in the

appropriate position.

Be careful when lifting the foam so that the tubes do not fall out.

Alternately, you can remove the tubes from the foam before removing

the foam itself. Please note the location and marking for each tube.

Refer to the next page for specifics on tube installation.

Install the tubes: Included with your Fosgate Signature Tube

Headphone Amplifier is a pair of white gloves for handling both the

unit as well as the tubes. This will prevent any finger oil from getting

on the tubes. The unit should be powered off with AC cable

disconnected. When inserting tubes into their sockets, be very careful

not to bend the metal pins.

Placement: The Fosgate Signature headphone amplifier is

dimensioned for convenient placement when listening with

headphones. It should be placed close to where you will be enjoying

your music. It is best to position the headphone amplifier away from

hum producing sources such as motors, transformers and power

cords. Good ventilation is essential for safety and the life of the

headphone amplifier. Allow at least 2” of clearance above the unit,

and avoid placement on a shelf directly above a heat and noise

source such as a power amplifier. Ideally, the shelf or table where it is

placed should be constructed of non-resonant material to minimize

microphonics.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Musical Surroundings Fosgate Signature Bedienungshandbuch Seite 6